PetSafe® In-Ground Dog Fence

DESCRIPTION

This easy to do yourself system is the perfect alternative to expensive conventional fences. Keep your pet in the yard! This easy, do-it-yourself system lets pets roam freely in the outdoor space you designate. The lightweight, 1.5 oz receiver collar fits necks 12 – 20 inches, and can operate up to six months on one set of batteries. The thorough how-to installation video also shows you how to properly install the system and train your pets.

Includes:

• 500 ft of wire (covers approx. 1/3 acre, additional boundary kits needed for areas over 1/2 acre)
• 50 flags
• patented UltraLight receiver collar with short and long probes
• adjustable transmitter
• batteries
• manual
• video in DVD format.

General Info:

• Will transmit up to 10 acres or 2,800 feet of wire
• Boundary Control Switch Settings: A= Greater than 2,400, B= up to 1,300, C= 1,300-2,400 feet
• One level of correction
• Should be installed in a dry and protected environment
• Boundary wire must be copper and must be insulated
• Can easily use 14-20 gauge wire
• Boundary Width is 20% Warning Zone and 80% Static Correction Zone

Transmitter Specs:

• Height: 4.75″
• Width: 4.25″
• Depth: 2.10″
• Frequency: 10.65 kHz Standard, 7kHz alternative available
• Flip up front cover
• Dark gray in color
• Two red indicator lights (loop and power)
• Wire break alarm
• Two Boundary Wire terminals
• Boundary Width Control Knob
• ABC Boundary Control Switch
• Adapter: Model number: RFA-14 (12v A/C, 830 ma)

Receiver Collar Specs:

• Height: .75″
• Width: 2″
• Depth: .75″
• Weight: 1.5 oz
• Uses 6-volt (RFA-67) Battery
• Waterproof
• Interchangeable Contact Points (Long and Short)
• Concave inside surface (side facing throat)
• Curved washers to match concave surface
• 30 second safety timeout

Additional boundary wire:
PetSafe recommends the use of 20 gauge insulated multi-strand copper wire for direct burial. The following indicates the approximate length of boundary wire needed for a rectangular, single-loop layout. Length will vary due to the amount of twisted wire and layout used.

• 1/4 Acre: 415 feet of wire needed
• 1/3 Acre: 480 feet of wire needed
• 1/2 Acre: 590 feet of wire needed
• 1 Acre: 835 feet of wire needed
• 2 Acres: 1180 feet of wire needed
• 5 Acres: 1870 feet of wire needed
• 10 Acres: 2800 feet of wire needed

  The Wire and Flag Accessory Kit includes an extra 500 feet of boundary wire and 50 flags.

  Warranty:
  Please click here to access warranty information.